NET AM2S SKILLS TEST COURSE

Overview

The AM2S Assessment is the End Point Assessment (EPA) for the NEW Electrotechnical Apprenticeship Standard. Candidates who are completing or have completed the Apprenticeship Framework must undertake the AM2 Assessment.

The test covers the following:

Composite Installation – Section A (10.5 hours)

Inspection and Testing of the Completed Composite Installation – Section B (3.5 hours)

Safe Isolation – Section C (30 minutes)

Fault Diagnosis and Rectification – Section D (2 hours)

Assessment of Applied Knowledge – Section E (1 hour)

How long will the course take?

3 DAYS

The AM2S Assessment will typically take three days with each section being timed, at a cost of £685+VAT.

Mandatory Evidence

The following items must be submitted as part of the gateway check before booking an AM2S Assessment:

The mandatory AM2S Candidate Checklist

The technical qualifications: City & Guilds 601/6299-15 or EAL 601/7345/2

Maths and English Level 2

Candidate PLR

The apprentice must provide formal evidence of an achievement of an acceptable equivalent qualification. This should be in the form of an official qualification certificate from the awarding organisation, or (if the apprentice does not have a qualification certificate and cannot source a replacement from the awarding organisation), a formal notification and/or statement of results, issued by the awarding organisation or a screen shot of their Personal Learner Record which must contain apprentice details, unique learner number, qualification achieved, awarding organisation date achieved and grade awarded.

Booking Information

For course bookings and information please phone us on:
Exeter – 01392 829100

Popular Courses

Other people also looked at these popular courses

ECS HEALTH & SAFETY ASSESSMENT

Prepared jointly with the JIB and the Scottish JIB, we are a JIB licensed ECS Health & Safety Assessment centre and are therefore able to deliver the JIB ECS Health & Safety Assessment.

Find out More

CITY & GUILDS 2391-52 LEVEL 3 TEST AND INSPECT

City & guilds 2391-52 level 3 test and inspect package has been developed for practicing electricians who wish to carry out Initial Verification and Periodic Inspection and Testing &...

Find out More

CITY & GUILDS 2382-18 18th EDITION

City & Guilds 2382-18, 18th edition course aim is to gain familiarity with the layout, content and use of the regulations.

Find out More

CITY & GUILDS 2919-01 ELECTRIC VEHICLE CHARGING

This course is aimed at practicing electricians, designers, managers and supervisors with the appropriate competency or responsibility for the following installations:

Find out More

CITY & GUILDS 2396 DESIGN

City & Guilds 2396 Design is a theory based course is intended for those who have responsibility for the design, specification, installation and testing process of electrical installations. It...

Find out More

JIB MATURE CANDIDATE ASSESSMENT

If you have many years' experience working in the electrical industry but never completed an apprenticeship or the NVQ Level 3, there is now a way to get formally assessed and meet the requirements...

Find out More

CITY & GUILDS 2377-77 PAT TESTING

City & Guilds 2377-77 PAT testing is a portable appliance testing course suitable for those who undertake inspection and testing of electrical equipment.

Find out More

CITY & GUILDS 2392-10 LEVEL 2 TEST AND INSPECT

City & Guilds 2392-10 Level 2 course aim is designed for practicing electricians who have not carried out inspection and testing since qualifying or who require some update training before going...

Find out More

NICEIC ELECTRIC VEHICLE CHARGING

This course will cover the requirements of BS7671 with regards to the new section on electric vehicle charging points, discussing how the electrical supply can be delivered from both private and...

Find out More

CITY & GUILDS 2393-10

The primary aim of the City & Guilds 2393-10 qualification is to enable practicing electricians operating in the domestic environment to gain an understanding of how to design and install...

Find out More

NET AM2 SKILLS ASSESSMENT

Our Exeter Training Centre is a fully licensed NET AM2 Skills Test centre. As part of the apprenticeship standard, all apprentices approaching the end of their training, or others wishing to accredit...

Find out More

NET AM2S SKILLS TEST

Find out More

NICEIC SAFE ISOLATION

This course is aimed at contractors looking to gain knowledge and practical understanding of how to safely and correctly isolate electrical systems to complete electrical repairs of installation...

Find out More

ECS ELECTRICAL SAFETY UNIT

This one-day course enables employers' who operate in areas allied to electrical installations to provide evidence of electrical safety training.

Find out More

EAL LEVEL 3 AWARD IN THE INSTALLATION OF SMALL SCALE SOLAR PHOTOVOLTAIC SYSTEMS

This course is designed to equip candidates with the skills and knowledge to be able to safely install, commission and hand-over small scale solar photovoltaic systems in line with statutory...

Find out More

CITY & GUILDS 2377-32 PAT MANAGEMENT

City & Guilds 2377-32 pat management qualification will provide the ability to supervise the PAT process, introduce efficiencies and save costs for your organisation.

Find out More

BASIC ELECTRICAL CONNECTIONS

This one-day course is aimed at those who must disconnect and reconnect electrical equipment as part of their day to day role, such as service and maintenance engineers.

Find out More

HIGHWAY ELECTRICAL - HESA

Here at The Focus Training we offer a range of different HESA courses, which can be delivered at one of our five centres, or at the customer’s premises.

Find out More

Contact Us

If you would like to make an enquiry please complete the contact form below

Bristol Centre - 01454 614203
Exeter Centre - 01392 829100
Newton Abbot Centre - 01626 832374
Plymouth Centre - 01752 348980
Redruth Centre - 01209 311001
Or contact us via email on: - enquiries@thefocustraininggroup.com

News & Events

11 Jan 2021

Remote Education Offer

07 Jan 2021

Electrical Trainer/Assessor Vacancy

07 Jan 2021

Gas Engineer Trainer/Assessor Vacancy

19 May 2020

COVID-19 Customer Information

02 Jan 2021

COVID-19 Update 02.01.2021

Electrotechnical Apprenticeship from the Focus Training Group

16 Dec 2020

Distinction for Josh Taylor

End point assessment success for Electrical Apprentice

Show Me All

All the social

Show Me All

Employer

Info & Advice

NET AM2S SKILLS TEST

Overview

The test covers the following:

How long will the course take?

Mandatory Evidence

Booking Information

Other people also looked at these popular courses

ECS HEALTH & SAFETY ASSESSMENT

CITY & GUILDS 2391-52 LEVEL 3 TEST AND INSPECT

CITY & GUILDS 2382-18 18th EDITION

CITY & GUILDS 2919-01 ELECTRIC VEHICLE CHARGING

CITY & GUILDS 2396 DESIGN

JIB MATURE CANDIDATE ASSESSMENT

CITY & GUILDS 2377-77 PAT TESTING

CITY & GUILDS 2392-10 LEVEL 2 TEST AND INSPECT

NICEIC ELECTRIC VEHICLE CHARGING

CITY & GUILDS 2393-10

NET AM2 SKILLS ASSESSMENT

NET AM2S SKILLS TEST

NICEIC SAFE ISOLATION

ECS ELECTRICAL SAFETY UNIT

EAL LEVEL 3 AWARD IN THE INSTALLATION OF SMALL SCALE SOLAR PHOTOVOLTAIC SYSTEMS

CITY & GUILDS 2377-32 PAT MANAGEMENT

BASIC ELECTRICAL CONNECTIONS

HIGHWAY ELECTRICAL - HESA

Contact Us

News & Events

Remote Education Offer

Electrical Trainer/Assessor Vacancy

Gas Engineer Trainer/Assessor Vacancy

COVID-19 Customer Information

COVID-19 Update 02.01.2021

Distinction for Josh Taylor

All the social